Traffic Safety & Equipment Co. - Truck Accessories, Back Racks, Toolboxes, Triangle safety kits, Towing Products, Truck Craft Dump Inserts

Truck Dump Inserts

Click on image to enlarge

Aluminum Dump Inserts

Shown with optional D-Icer

TC-120 Ultra Aluminum Dump Insert
The TC - 120 ULTRA has been engineered from the ground up to provide users with years of maintenance free service. The body and frame are designed and constructed entirely of aluminum and stainless steel to provide durability and resistance to rust and corrosion. TruckCraft's innovative use of aluminum alloy extrusions welded to sheet aluminum enables them to offer a pickup dump insert that is 300 - 350 lbs. lighter than comparable steel units. The result is a unit that weighs less, hauls more payload, and will be less expensive to operate and maintain.

Options:

SlipStream Cab guard
Rollup tarp
Quick-Cover
Installation - dealer prices may vary
Side Board Installation (Rigid)
Side Board Installation (Swing Away)
AlumaBoards 18" Sideboards
Orion Screened Bulkhead

Specifications:

7,000 lbs. capacity
Cap. 2.4 cu. yds. 5 with sideboards
Three-way tailgate
Insert weight- 420 lbs.
3 year warranty
All Aluminum Bed - 48 1/8" x 98"
AlumaBoards 18" Sideboards
Rigid Floor of Extruded Aluminum

Steel Dump Inserts

TC-100 PRO Steel Dump Insert
The TC-100 is manufactured to the highest quality standards. It is an addition to your pickup that you will be proud to own. Every feature has been designed and built tough to serve you better. Features include a seamless floor; a heavy-duty three-way tailgate; maintenance free power operation; a bed capable of handling a full sheet of plywood; and a finish that has been etched, primed and final coated to complement any truck. The unit can be installed in your truck, by you (no welding, no cutting; only two bolts and one cable), in less than two hours.

Options:

Available in shortbed model
Cab guard
Rollup tarp
Set of Side Boards NEW!
Installation - dealer prices may vary
Aluma Tie Down Rail kit- installs in 30 minutes with no drilling. NEW!

Specifications:

a13 3 year warranty NEW!
a12 2 models to fit standard 8' bed, or shortbed pickups
a11 6,200 lb. dump capacity NEW!
a10 2 Cu. Yd. capacity (5 Yd. with sideboards)
48.5" x 101" Cargo area
12 volt MONARCH HYDRAULICS™ Electro-Hydraulic system
47 degree dump angle
14 Ga. steel sides continuously welded to 12 Ga. steel floor, 10 Ga. tailgate.
Two welded stake pockets on front bulkhead, and 16" removable corner standards to provide slots for side boards at rear. NEW!
Dumper weight- 750 lbs.

Aluminum Flat Beds

TC-500 Heavy Duty Truck Flat
All materials are 6061-T6 extrusions with 37,000 PSI minimum tensile strength. The floor is constructed of aluminum alloy plank extrusions that provide rigid reinforcement every 5", and have a tongue-in-groove joint on top to take heavy punishment in stride.
The standard long sills are 4" high x 2 1/4" wide structural aluminum channel, with optional 6" height available for hoist, or extra heavy duty applications.
Rub rails are a custom shape providing 5 1/2" side height with extruded ribs for added strength and improved appearance. The rub rails, as well as the front and back rails, have stake pockets cut into the top. Bed corners are mitered for safety and improved appearance.
Body comes complete with flush mounting 2 1/2" grommet style clearance, marker, and I.D. FMVSS lights with wiring harness.

Options:

Widths 81in, 94in, 96in. Any Length up to 16ft
Splash Guards - Front, Diamond Plate
Mudflaps - White, Embossed Red TruckCraft Logo
40in, 48in, 52in, 54in, CABGUARDS
6 inch Stringer
Tubular Aluminum Step Bumper
6in, 12in, 30in, 40in Extruded Aluminum Rack Sides
Installation Hardware Kit
Installation Mounting Ribs for SPRINTER Chassis

Specifications:

1 Year Warranty
Floor Construction - Plank extrusions provide rigid reinforcement every 5".
Rub Rail - 5 1/2" custom shaped rub rail with mitered corners & stake pockets cut in the top.
Cab Guard - Profile shape with protected window area. 5 1/2" frame matches rub rail appearance. Bulkhead of 1/8" bright diamond plate.
Tailboard - 10" high, bright diamond plate with wrap around corners. Includes license plate light, 4 1/2" stop, tail, turn and backup lights.
LED Lighting standard

Spreaders for dump inserts and dump trucks

TC-130 D-ICER for Pickup Inserts
TruckCraft's TC-130 D-ICER is a premier spreader made entirely of aluminum and stainless steel. The "Ice Control System" is designed to fit our TC-120 Ultra Aluminum Pickup Dump Inserts and, with adapters, other models and brands of pickup dump inserts. The TC-130 is non-rusting and provides near "0" maintenance and operational costs. TruckCraft uses the highest grade of corrosion resistant aluminum available. All grade A or B - Aluminum Assoc. Standard for grades #6061 and #5052.

Specifications:

All aluminum and stainless steel spreader
Near "0" maintenance and operational costs
Fast return on your investment
Designed to adapt to many pickup dump beds
Highly reliable electric motors
Quick installation and removal
One-year factory warranty

<<Back